How To Install A Hose Holder

How to Brand Your Own Holder for Garden Hose Storage

Updated: Mar. 19, 2022

If you want to adorn your garden area, endeavor a few easy DIY upgrades to make a house await expensive, like this high-end looking hose holder.

With an inexpensive wood post, a tin of spray paint and a couple of pieces of hardware, y'all tin can create a holder for your garden hose worthy of your front yard.

Y'all might too like: TBD

DIY Hose Storage Holder

If you lot want to beautify your garden expanse, effort a few like shooting fish in a barrel DIY upgrades to make a house expect expensive, like this high-finish looking garden hose storage holder. This elegant garden hose storage slice looks pricey, but you tin can build one yourself for very little money! And don't worry if you lot're a novice DIYer — even beginners can successfully construct this easy-to-make garden hose holder project.

Materials needed for h2o hose storage:

• Wooden post, 4″X 4″X 8′
• Round saw (optional)
• Wood mucilage
• Forest square, 4″
• Wood square, 5″
• Drill
• Woods finial
• Wall mount hose storage holder
• Pencil
• Woods screws
• Outdoor spray paint
• Shovel

Garden Hose Holder Instructions:

1. Cut the 8-foot wooden postal service in half so that you have two posts measuring 4-feet long each. You can either practise this yourself using a circular saw or take the mail cutting for you at the lumber supply shop. An 8-human foot postal service costs effectually $9, but this will enable you to take enough material for ii hose holders.
2. Stand the wooden mail upright on the ground. Brace the postal service if necessary in order to go on it stationary equally y'all work.
3. Heart and glue a 4-inch square piece of wood on peak of a 5-inch square slice of wood using outdoor-rated wood glue. Permit the glue to dry.
4. Center and glue the stacked pieces of wood on top of the wooden post using wood glue. Allow the gum to dry.
5. Drill one pilot hole down into the middle of the stacked pieces of wood.
6. Screw the wood finial into the airplane pilot pigsty. Yous tin can probably do this by hand.
7. Make up one's mind on which side of the post will become the front, and identify a wall mount hose holder against the postal service. Adjust the holder so that it's positioned about 12 inches below the acme of the post. You can detect a bones wall mountain hose holder for under $x, or you can use a more decorative holder for under $14.
8. Marking the spiral holes of the wall mount garden hose storage holder using a pencil, then set the hose holder aside. Drill pilot holes into the marks.
9. Position the wall mountain hose storage holder onto the post and attach it using wood screws.
10. Paint the unabridged garden hose storage holder using an outdoor spray paint, such as the Rust-Oleum Stops Rust Protective Enamel Hammered Black Spray Pigment. Allow the paint to dry completely.
11. Dig a hole for your garden hose holder that'due south around 18 inches deep. Brand certain to dig the pigsty relatively shut to the water spigot on your house.
12. Identify the lesser of the hose holder mail into the hole, and brace the post with rocks and stones. Fill the dirt back into the pigsty and tamp it downward.
13. Attach one finish of your garden hose to the spigot, and then wind the length of the hose around the holder for storage.

Looking for more cheap outdoor projects? Try these 10 like shooting fish in a barrel-to-build planters and trellises for bound.

Originally Published: March 19, 2022

Similar Projects

Source: https://www.familyhandyman.com/project/how-to-make-your-own-holder-for-garden-hose-storage/

Posted by: boydafterand.blogspot.com

Share this post